|
|
Mortars with Alternative Materials
Kozielová, Silvie ; Sokola, Lubomír (referee) ; Žižková, Nikol (advisor)
This bachelor’s thesis deals with building material mortar. These are mainly the use of waste materials from industry to replace part of the filler or binder to produce mortar. The theoretical part deals with information about the classification and properties of mortar on their ingredients and methods of use. Collectively describes alternative raw materials suitable for use in mortar production and trends of our time for its production. The practical part is focused precisely on the use of alternative raw materials to replace part of the filler or binder to produce mortar. Evaluated and compared with the properties achieved by the mortar with the selected raw materials waste.
|
|
|
Long-term tests for examination of surface treatments in various adverse environments simulating real effects
Hudečková, Petra ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
Cement bonded particleboards contain organic base and as they are set outside, extreme weather condition, such as frost, chemical defrosting substances or sulphates, cause their degradation. The presence of the organic base in the matrix of the material could be the reason why there is higher probability of degrading when compared with materials containing an inorganic base. It could be partially eliminated by an appropriate surface modification of the slab, which main goal is to weaken the impact of an aggressive environment and to extend the lifespan of the board. On the other hand, the surface modifications based on a polymer base are prone to degrade because of other unfavourable conditions such as UV radiation when compared with the cement bonded particleboard. The classification of the surface modifications and the way of their degradation caused by the aggressive environment in real applications are presented in the theoretical part of the thesis. In the experimental part, appropriate methodical ways of testing the resistance of cement bonded particleboard’s coating system were chosen. Then, the testing and comparing of the physical, mechanical and aesthetic properties of different types of coatings were done. Moreover, a spectrophotometric analysis of the colour shade changes for the different aggressive environment were carried out. Furthermore, microstructures of chosen surface modifications were assessed by using an optical and an electron microscope.
|
|
|
Lightweight mortars with content of alternative raw materials and resistant to adverse effects
Morkusová, Kristýna ; Jakubík, Aleš (referee) ; Bydžovský, Jiří (advisor)
This diploma thesis describes research and following development of lightweight cement mortars with alternative raw materials. Attention was focused on study of the effects of extreme influences such as high temperature (up to 1200 °C), freeze-thaw and agressive sulfur dioxide. Verification of durability of developed mortars was realized using physical and mechanical tests (density and strength), physical and chemical methods (computed tomography) and scanning electron microscopy. Assessment of durability was realized in a longer period of time (90 days).
|
|
|
Dispersed reinforcement influence on the maturation of polymercement materials
Zaťko, Petr ; Jakubík, Aleš (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on polymercement materials with dispersed reinforcement. The aim of this work is development of suitable polymercement mixture and monitoring of the impact of dispersed reinforcement on the course of maturation of these materials and physico-mechanical properties. The effect of high temperatures on the properties of the mortar is also examined. Emphasis is placed on the use of alternative resources and byproducts. Mixed binder of cement and slag and admixture of microsilica was used. Recycled cellulose was used as dispersed reinforcement and was compared with commercial polypropylene fibers.
|
|
|
The development of fire-resistant repair mortars with fine-grained filler
Záruba, Jiří ; Gross,, Tomáš (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on fire-resistant repair mortar with fine-grained filler. The aim of this work is the research and development of fine-grained Mortars resistant to high temperatures, which are characteristic at the beginning of the fire. The theoretical knowledge with subsequently realized laboratory verification was used. At-tention was paid to the masses based on the mixed binder comprising cement and blast furnace slag, respectively. high-temperature ash. Cellulose fibres were used as the dis-persed reinforcement. Two kinds of aggregate were assessed - fly ash agloporit and am-phibolite incl. combinations thereof. Laboratory tests were carried out via determination of basic material properties (density, strength, consistency, dimensional changes etc.) after exposure to extreme temperatures. A substantial part of the research was also study of different cooling conditions - slow and fast (water and air). Selected formulations were subjected to temperatures up to 1200 ° C. In the conclusion is selected several recipes that have been found to be optimal for continuing research on the basis of the results and findings.
|
|
|
Cement-bonded particleboards with utilization of alternative raw materials
Urbánek, Libor ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on effective utilization of currently produced alternative raw materials in the production of cement-bonded boards. The emphasis is primarily on the scraps and dust arising from the processing of cement-bonded slabs, as well as on slag and limestone. The theoretical part contains a survey of current knowledge about the given issue. In the experimental part, the alternative raw materials were analyzed in detail and their influence (as modifier components of the matrix and the filler) on the properties of cement-bonded slabs was examined. Research and development took place using physico-mechanical, thermal and microstructural methods.
|
|
|
Optimisation of cement-bonded particleboard matrix composition by using alternative raw material sources
Roháček, Lukáš ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis deals with possibility of utilization raw materials from alternative sources for production of cement-bonded particleboards. In theoretical part the possibilities of modifying composition of cement-bonded slabs with emphasis on their matrix are discussed in detail. On basis of the findings and their evaluation, waste from the formatting of cement-bonded particleboards, micronized limestone, heat sink and high temperature fly ash were selected to the composition modification. The mentioned raw materials were analyzed and subsequently tested as substitutes for the matrix of cement-bonded particleboards in the experimental part. The properties of the proposed materials were tested even in the longer term, including the microstructure.
|
|
|
Utilization of alternative raw materials in sand aerated concrete technology
Ondříčková, Pavlína ; Kulísek, Karel (referee) ; Drochytka, Rostislav (advisor)
The presented work deals with the problems about silica sand replacement for alternative raw materials in the production of autoclaved aerated concrete. The work describes technology of production and creating structures of autoclaved aerated concrete. The main part of the work is the study scientific articles dealing with alternative materials in autoclaved silicate materials. The object of work is to find the most suitable domestic alternative materials for supplement or replacement for silica sand in production of autoclaved aerated concrete.
|
|
|
Boards with alkali activated binder filled with wood chips
Gajdušková, Patricie ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
For the production of cement chipboards, cement is used as a binder which is an ecological burden for our planet. This diploma thesis deals with research into the possibility of replacing it with other alternative materials, especially those that are created as a by-product of other production. The focus is primarily on slag, heating plant slag or brick dust. The theoretical part deals with the previous studies and theoretical knowledge of alkaline-activated matrices which are supplemented with an organic binder such as wood chips which are used to reinforce the boards. The practical part deals with the above-mentioned alternative materials which are tested for the design of recipes for modified boards made of alkali-activated binder reinforced with chips. These modified recipes are subsequently subjected to physical-mechanical tests such as bending strength, modulus of elasticity and other monitored parameters of the boards. Selected board variants were analysed in terms of mineralogical composition and microstructure.
|
|
|
The development of composite material system with focus on matrix for extreme conditions
Gratclová, Kamila ; Gross,, Tomáš (referee) ; Bydžovský, Jiří (advisor)
The thesis deals with composite systems, with a focus on matrix resistant to extreme conditions. The aim of this work was to research and development matrix, resistant to high temperatures, typical in case of fire. Used theoretical knowledge were realized with subsequent laboratory research. Attention was paid matrices based binder mixed with any alkali activation of alternative raw materials and geopolymers. Scattered reinforcement featured polypropylene fibers. The subject of the practical part of the two alternatives, including a matrix based on basic ingredients - cement, alternative raw materials - high fly ash, blast furnace slag, geopolymer and polymeric components incl. combinations thereof. Laboratory research conducted by determining the fundamental material properties such as density, strengths, etc., after heat exposure. The developed materials were subjected to a temperature 1400 ° C. The conclusion was selected several recipes that were based on the resulting values found to be optimal.
|
guest ::
